National Hotline 86-0510-82692229
  • Contact:Mark Huang
  • Tel:86-0510-82692229
  • Mob:+86 13915255524
  • Fax:86-0510-82696667
  • Email:mid@go2mj.com
  • Web:www.chinamjjx.com
  • Add:China Wuxi City Min Feng Road 198
News Details Your location: Home > News > 详细内容

How to maintain the pellet packing machine?

Source:[seo:selfurl]Release time:2021-02-21

How to maintain the pellet packing machine?

Particle packing machine is suitable for packaging Chinese medicine, pesticide, feed, salt, soup, seeds and other free flow granule products. Long time use, equipment will inevitably appear some small problems, this time the maintenance of equipment is particularly important.

Maintenance of granule packing machine:
Maintenance Instructions:


1. Check the parts regularly, once a month, check whether the worm gear, worm, bolts on the lubrication block, bearings and other movable parts are flexible and wear, repair defects should be found in time, and shall not be forced to use.


2. The machine shall be used in a dry and clean room, and shall not be used in the atmosphere where there are acids and other corrosive gases circulating to the body.


3. After the machine is used or stopped, it should take out the rotating drum to clean and brush the remaining powder in the bucket, and then assemble it properly for the next use.


4. When the drum moves back and forth in the work, please adjust the M10 screw on the front bearing pawn to the appropriate position. If the gear shaft is moving, please adjust the M10 screw behind the bearing frame to the appropriate position, adjust the clearance so that the bearing does not make noise, hand turn the pulley, it is appropriate to tighten properly, too tight or too loose can cause damage to the machine.


5. If it is out of use for a long time, it is necessary to wipe the whole body of the machine, coat the smooth surface of the machine with antirust oil, and cover it with cloth.


Machine lubrication:


1. The box part of the machine is equipped with an oil gauge, which should be refueled once before starting. It can be added halfway according to the temperature rise and operation of each bearing.


2, worm gear box is necessary for long-term storage of oil, the oil level of worm gear all into the oil, such as frequent use, must be changed every three months for a new oil, the bottom of the oil plug, can be used.


3, when the machine refueling, do not make the oil spill out of the cup, not to flow to the machine around and on the ground. Because oil is easy to make the material pollution, affect the quality of products.


No matter what equipment machine use for a long time will inevitably appear some small problems, as long as we pay a little attention to some, to do regular maintenance of the equipment, the service life of the equipment can be increased, I hope you can take good care of their work partners.

RELATED NEWS
RELATED PRODUCT

Copyright© www.chinamjjx.com(Copy link) M&J Machinery Engineer Co., Ltd.

Specially produce:Big bag filling machine,Containerised bagging system,Fine Powder Filling MachineAnd other products, welcome to inquire!

Business circles: 油雾净化器 铝合金门窗 硅胶导尿管

Technical Support: Wuxi Dxiang

Scan into mobile web site

QQ

MOB+86 13915255524

TEL86-0510-82692229