Maintenance of granule packing machine
The maintenance of granule packing machine is essential for long time use.
Gear lubrication
1. The tank part of the machine is equipped with an oil gauge, which should be refueled once before starting. It can be added halfway according to the temperature rise and operation of each bearing.
2. The worm gear box must store oil for a long time, and the oil level is all invaded into the oil by the worm gear. If it is often used, it must be replaced with new oil once every three months.
3, when the machine is refueling, do not make the oil spill out of the cup, not to flow around the machine and the ground. Because oil is easy to make material pollution, affect product quality.
Maintenance instructions
1. Check the parts regularly, once a month, check whether the worm gear, worm, bolts on the lubrication block, bearings and other moving parts are flexible and wear, and repair the defects in time, not forced use.
2, the machine should be put in dry clean indoor use, not in the atmosphere containing acids and other corrosive gas circulation places.
3. After the machine is used or stopped, the rotating drum should be removed for cleaning and brushing the remaining powder in the bucket, and then installed to prepare for the next use.
4. If it is not used for a long time, the whole machine must be wiped clean, the smooth surface of the machine is coated with anti-rust oil and covered with cloth.