1. Regularly check the particle packing machine, check whether the worm gear, worm, lubricating block bolts, bearings and other moving parts are flexible, and their wear, if there is a problem must be timely treatment.

2. It can be used in a dry and clean room. It can not be used in circulation places that contain acids and other corrosive gases to the body.

3. After the completion of use or when it is stopped, the rotating drum should be taken out to clean and brush the remaining powder particles in the bucket, so as to prepare for the next use.

4. When the drum in the work occurs before and after the movement, this time to adjust the m10 screw on the front bearing pawn to the appropriate position.

5. The suspension time of the particle packaging machine is relatively long, and the whole body of the machine needs to be wiped clean, and the smooth surface of the parts is coated with anti-rust oil, and then the cloth cover is good.