1、the use of the environment should be in a dry and clean room, can not be used in the atmosphere containing acid and other corrosive gas flow to the body.

2、regular inspection of parts, recommended once a month, check worm gear, worm, lubrication block bolts, bearings and other moving parts of the rotation is flexible and wear, found that the problem should be repaired in time, can not be forced to use.

3、 Adjust the position of the bearing frame to achieve appropriate tightness. Too tight or too loose may lead to damage of the powder packing machine. In the powder packaging machine oil can not make the oil spill out of the cup, not to leave around the machine and the ground, because the oil is easy to pollute the material, affect the quality of products. If it is used frequently, change the oil every three months.

4、After the machine is used or stops working, the screw should be taken out to clean and brush the remaining powder in the hopper, and then loaded to get ready for the next use.